General Contractor in Bonita Springs
& Fort Myers Beach
Hiring a general contractor in Bonita Springs or Fort Myers Beach is a licensing question before it is a portfolio question. The license is what stands behind the permits on your project, the insurance certificates your HOA demands, the inspections that protect your resale, and your recourse if anything goes wrong. Cutting Edge is a licensed, insured general contractor with 500+ completed Southwest Florida projects — and we put the credential to work on every job, not just the ones that require it.
We serve as GC weekly across Bonita Springs, Bonita Beach, Estero, and Fort Myers Beach on kitchens, baths, whole-home renovations, condo rebuilds, and storm-recovery work — the project types where sequencing trades, managing inspections, and holding a schedule separate contractors from coordinators. Coastal and flood-zone requirements, wind-load product approvals, and condo-board paperwork are standard practice here, not research projects.
What our license sits on top of is unusual: in-house trades. Carpentry, tile, flooring, drywall, and paint are our own crews, which means the GC making the schedule also commands the people executing it. Combined with fixed-price contracts and a single point of contact, that is why our projects finish on the calendar we wrote.
Licensed, insured, in-house, fixed-price — that is what a general contractor in Bonita Springs and Fort Myers Beach should mean. At Cutting Edge, it is what it does mean.
What a General Contractor Does
That Others Can’t.
In Florida, a general contractor license is required for any remodeling work involving structural changes, load-bearing wall removal, major electrical upgrades, or complex plumbing modifications. A GC can legally pull permits for this scope of work and is legally responsible for code compliance across every trade on the project. A remodeling company without a GC license cannot legally take on this work.
As your licensed general contractor in Bonita Springs, we manage the entire project — every trade, every permit, every inspection, every HOA submission — under one license and one fixed-price contract. Open-concept wall removal that requires structural engineering. Kitchen remodels that need electrical panel upgrades. Full interior transformations involving multiple simultaneous trades. All of it, handled by a single accountable team.
Every project starts with a free LiDAR scan and a 3D photo-realistic render of the finished result — showing every structural change, every material, every finish — before we pull a single permit or place a single order. You approve it. We build it exactly as designed.
Book Your Free GC Consultation →General Contracting Fort Myers Beach
& Naples.
Our General Contractor Process
in Bonita Springs FL
What GC-Scope Projects Return
in Bonita Springs
Projects requiring a licensed general contractor — structural changes, open-concept conversions, full interior remodels — often return the most because they address the root issues in aging Bonita Springs homes, not just surface finishes. Here’s what these scopes return across Bonita’s major community vintages.
Based on 2025 SWFL Cost vs. Value data. Updated quarterly. Book a free GC consultation for a scope and ROI breakdown specific to your Bonita Springs home.
Bonita Springs Communities
We Serve as Licensed GC
We have served as the licensed general contractor for projects throughout every major community in Bonita Springs and Lee County. Florida GC license, full liability and workers’ compensation insurance, pre-registered gate access to all gated communities, and a local showroom at 28280 Old 41 Rd #3.
What Our GC License Covers
in Bonita Springs
- Load-bearing wall removal + beam installation
- Open-concept kitchen + living conversions
- Room addition structural work
- Structural engineering coordination
- Permit drawings preparation + submission
- All Lee County structural inspections
- Electrical panel upgrades + circuit additions
- Plumbing rough-in moves + drain replacements
- HVAC modifications + new runs
- Framing + drywall + insulation
- Complete multi-trade coordination
- All required trade inspections
- Kitchen remodels — all tiers
- Bathroom remodels — full gut to refresh
- Full interior transformations
- Outdoor kitchens + lanai structures
- Specialty rooms — wine rooms, home theaters
- HOA + permit management for all scopes
What Drives GC
Project Cost?
A general-contracted project prices on the scope you commission and the compliance the scope triggers — and a good GC surfaces both before contract.
- Trades involved — each trade in scope adds sequence & labor
- Material tiers — selections priced individually, locked at contract
- Structural work — beams, openings & load paths
- Restoration scope — storm & water recovery beyond cosmetics
- Permits & inspections — scoped & priced up front
- Engineering — where structure or wind load demands it
- Product approvals — wind-rated doors, windows & assemblies
- HOA & condo packages — boards, insurance certs & access rules
Scope & compliance in one fixed contract — across Bonita Springs, Bonita Beach, Estero & Fort Myers Beach.
Run Like It Is Ours.
- Permits pulled & closed
- Insurance certs delivered unasked
- Product approvals documented
- Inspection file complete at handoff
- In-house trades, one sequence
- Written schedule with milestones
- Corrections handled inside schedule
- Daily site standards enforced
- Fixed-price contract
- Selections priced before signing
- Changes in writing, your call
- The number that starts, ends
Every Service. One Team.
Kitchen remodels. Bathroom renovations. Full interior transformations. Outdoor kitchens. Specialty rooms. We are Bonita Springs’ most complete remodeling contractor — with a showroom at 28280 Old 41 Rd #3, 9 Years Best of Houzz awards, and 500+ completed projects across Lee County.
General Contractor Bonita Springs
FAQ
The Cutting Edge Standard,
Licensed.
Cutting Edge treats the general contractor role as a fiduciary one: your budget, your home, and your paperwork handled as carefully as your finishes. Nine consecutive Best of Houzz years across Bonita Springs, Bonita Beach, Estero, and Fort Myers Beach were earned as much in permit offices and inspection walkthroughs as on job sites — because a beautiful project with sloppy paperwork is a liability wearing new tile.
The practical Cutting Edge difference: permits pulled and closed on every job that needs them, insurance certificates delivered to your HOA before anyone asks, product approvals documented on wind-rated installs, and inspection corrections handled inside the schedule rather than as drama. Meanwhile the fixed-price contract does what it promises — the number that starts the project ends it, and changes happen only when you request them, priced in writing first.
Interviewing general contractors in Bonita Springs or Fort Myers Beach? Verify the license, then ask three things: who pulls and closes permits, whose crews do the work, and what happens to the price after demo. Then ask Cutting Edge. Those answers are why realtors, insurers, and condo boards keep our number — and why homeowners only need it once to keep it forever.
Ready for a GC who runs the project like it is theirs? Call (239) 469-6494 or book a consultation — scope, schedule, and a fixed number in writing.
Florida Licensed GC.
Bonita Springs Based.
Your free GC consultation includes a full project scope assessment, a 3D render of the finished result, a community ROI analysis, and a fixed-price estimate covering every trade, every permit, and every HOA submission under one GC license — no commitment required. Florida license verifiable at myfloridalicense.com.