---
title: "Laundry Room Sink: Options and Installation"
url: https://remodelbycuttingedge.com/laundry-room-sink/
date: 2026-10-11
modified: 2026-10-11
lang: en
author: "Blane Perun"
description: "Laundry room sink options for Florida homes: stainless, composite and fireclay sinks, plumbing, placement and cabinets from a Bonita Springs remodeler."
image: https://remodelbycuttingedge.com/wp-content/uploads/2026/07/Laundry-Room-by-Cutting-Edge-Bonita-Springs-1-1024x572.webp
word_count: 911
---

# Laundry Room Sink: Options and Installation

![Laundry Room Sink Options and Installation by Cutting Edge Kitchen & Bath](https://remodelbycuttingedge.com/wp-content/uploads/2026/07/Laundry-Room-by-Cutting-Edge-Bonita-Springs-1.webp)Laundry Room Remodel · Bonita Springs & Naples
# Laundry Room SinkOptions and Installation
Laundry Rooms From$6.5KBased on our Laundry Room packagesDesign VisitFreeLiDAR scan and photo-real 3D renderBuilt ByOur CrewsLicensed Florida GC, 500+ SWFL remodels
By **Blane Perun**, Owner · Cutting Edge Kitchen & Bath·20 years property management · 500+ SWFL remodels · Updated October 2026

The short answer
A laundry room sink is a deep utility basin, usually 9 to 14 inches deep, for soaking stains, hand-washing delicates, rinsing beach gear and filling buckets. You can buy a freestanding tub, but most remodels set an undermount or drop-in sink into a base cabinet with a countertop for folding. Installation needs hot and cold supply lines, a trapped and vented drain, and space beside the washer. Adding one is simplest when the sink shares the wall with the washer's existing plumbing.

[Part of our Laundry Room guide →](/laundry-room/)

![Laundry room with deep utility sink and quartz counter in Bonita Springs](https://remodelbycuttingedge.com/wp-content/uploads/2026/07/Laundry-Room-by-Cutting-Edge-Bonita-Springs-2.webp)Laundry Room · Cutting Edge Kitchen & Bath

## Which Laundry Sink Should You Choose?
The main choices are material and mounting. Stainless steel is light, affordable and stain-resistant, and it works undermounted below quartz. Composite granite resists chips and comes in colors that blend with the counter. Fireclay or enameled cast iron give a farmhouse look and a very durable glossy finish, though they are heavy and need a cabinet built to carry them. Molded plastic utility tubs are the budget option and are best left in the garage. Pick a faucet with a pull-down sprayer and a tall spout so buckets fit underneath.

Placement is mostly a plumbing decision. The washer already has hot and cold valves and a drain standpipe, so a sink beside it can usually tie into those lines with a separate trap and proper venting. Moving it to another wall means opening drywall and, on a slab, possibly cutting concrete to reach the drain, which adds cost. A 24 to 30 inch sink base fits most rooms, and a matching countertop across the washer and dryer turns the area into a folding station. Add a GFCI outlet nearby for irons and steamers.

| Sink type | Pros | Watch for |
| --------- | ---- | --------- |
| Stainless steel undermount | Affordable, light, pairs with quartz | Thin gauges can dent and drum |
| Composite granite | Chip-resistant, color options | Higher cost than stainless |
| Fireclay farmhouse | Durable glaze, classic look | Heavy; cabinet must support it |
| Enameled cast iron | Very durable, deep bowls | Heavy, enamel can chip if struck |
| Freestanding plastic tub | Lowest cost, quick install | Looks utilitarian, no storage |
| Drop-in in laminate or quartz | Simple install, easy to replace | Rim collects grime |

Upgrade Your *Laundry Room.*
Compare our laundry room packages with cabinets, quartz counters and a deep utility sink built in.

[See Laundry Packages →](/laundry-room/)[Set an Appointment](/contact/)

## What Changes in a Southwest Florida Laundry?
Florida slab-on-grade homes run drain lines under the concrete, so where the sink goes affects the price more than which sink you buy. If the washer box is on an interior wall, a side-by-side sink is usually straightforward. If the laundry is on a second floor or inside a condo, a leak becomes the neighbor's problem, so we add a washer pan with a drain, braided or PEX supply lines and, where it makes sense, a leak sensor with automatic shutoff. Condo associations in Bonita Springs and Naples often require approval for plumbing changes.

The sink earns its place here. Sand, sunscreen, pool chemicals, golf grass stains and pet baths all end up in the laundry, and a deep basin keeps that mess out of the kitchen. Hardware near the coast should be stainless or solid brass, since salt air corrodes cheaper fittings. Most jurisdictions, including Lee County and the City of Bonita Springs, expect a plumbing permit for new drains or relocated supply lines. A licensed plumber handles that as part of our fixed-price contract.

![Remodeled laundry room with sink cabinet in a Southwest Florida home](https://remodelbycuttingedge.com/wp-content/uploads/2026/07/Laundry-Room-by-Cutting-Edge-Bonita-Springs-3.webp)Laundry Room · Cutting Edge Kitchen & Bath

## Laundry Sink Questions

### Can a laundry sink drain into the washer standpipe?
In many cases the sink can connect to the same drain line as the washer, but it needs its own trap and the system must be properly vented and sized. Simply hanging the sink over the standpipe is not up to code. A licensed plumber confirms the layout and pulls the permit.

### How deep should a laundry room sink be?
A depth of 10 to 14 inches is ideal for soaking and rinsing large items without splashing. Shallower sinks around 8 to 9 inches suit rooms where the counter doubles as a work surface. Pair a deep bowl with a tall, pull-down faucet so mop buckets fit easily.

### Is it worth adding a sink to a small laundry room?
Usually, yes. Even a compact 15 to 18 inch sink in a narrow base cabinet handles stain treatment and hand washing. Our laundry room packages start from $6,500 and can include a sink when the room is remodeled, which costs less than adding plumbing later.

Add Your *Utility Sink.*
Tell us where you want the sink and we will check the plumbing, render the room and quote one price.

[Plan Your Laundry Sink →](/laundry-room/)[Set an Appointment](/contact/)

## Why Bonita Springs Trusts Cutting Edge
A laundry sink looks simple until the drain has to reach a line under a concrete slab. Cutting Edge Kitchen & Bath handles that with licensed plumbers, our own cabinet installers and one fixed-price contract. We work from a 4,000-square-foot showroom at 28280 Old 41 Road in Bonita Springs, have completed more than 500 Southwest Florida remodels and hold nine Best of Houzz awards. A free LiDAR scan maps the room and plumbing walls, and a photo-real 3D render shows the sink, cabinet and counter before work begins, so there are no surprises later.