Bonita Springs · Bonita Bay · Bonita Beach · Ft Myers Beach

Electrical Installation — Bonita Springs & Ft Myers Beach FL

Electrical Installation — Bonita Springs & Ft Myers Beach FL — Remodel by Cutting Edge
Bonita Springs · Bonita Beach · Ft Myers Beach · Licensed & Insured

Electrical Installation —
Clean Placement.
Tidy Finish.

Ceiling fans, recessed lighting, fixtures, and outlets — the electrical installs that finish a room, placed clean, aligned straight, and done safely. The same finish standard we bring to every full remodel.

What makes us different
22
Community-aware tools — budget, ROI, package recommendations
Unique to this site
10
AI visualization tools — free after your consultation
Florida Exclusives
2
Authorized InvisaCook dealer (hidden induction cooktops) + Designer Stone Panels distributor (backlit translucent onyx, marble, quartzite) — both Florida-exclusive to Cutting Edge.
9 Yrs
Best of Houzz
4.9★
38 Reviews
500+
Projects Done
80+
Communities
Free
LiDAR + 3D Scan
Local Electrical Installation

Electrical Installation in Bonita Springs
& Fort Myers Beach

Electrical installation in Bonita Springs and Fort Myers Beach is the trade where craftsmanship and safety are the same thing. The recessed lighting that transforms a dated great room, the lanai fan that makes summer evenings usable, the chandelier centered over the table on the first try — each one is also a load on a circuit, a box that must be rated for what hangs from it, and in many cases a permit and inspection the county expects. The right installer delivers both halves without you having to ask.

We handle electrical installs across Bonita Springs, Bonita Beach, Estero, and Fort Myers Beach every week — whole-room recessed packages, under-cabinet LED in kitchen remodels, ceiling fans hung on properly braced fan-rated boxes, dimmers and smart switches, and the outlet upgrades that bring older homes up to how families actually live now. In the beach condos, that work comes with its own logistics — building schedules, limited attic access, and panels that have seen four decades of salt air — all conditions our crews plan for rather than discover.

Every install follows the same rules: load calculated before a new circuit is promised, GFCI and AFCI protection where code requires it, fan-rated boxes on every fan — including where the builder skipped them — permits pulled and inspections closed where the work demands it, and the panel labeled honestly when we close up. Fixture swaps in existing boxes stay economical; new locations get quoted straight after we see the ceiling, not guessed from the driveway.

And because we are a full remodeling company, the drywall our fishing opens gets patched and painted by our own crews — clean placement, straight alignment, and a tidy result, on one fixed quote from Bonita Springs to Fort Myers Beach.

Electrical Contractor Cutting Edge Bonita Springs (1)
Cutting Edge
Remodel by Cutting Edge
Electrical Installation — Bonita Springs, Bonita Beach & Ft Myers Beach

Lighting Is the Cheapest Upgrade
With the Biggest Visual Payoff.

Swap yellowed builder fixtures for well-placed recessed cans and a statement pendant, and a 1990s room reads current for a fraction of remodel cost. The catch is doing it right: fans on fan-rated boxes, cans laid out on the room — not on the joists that happened to be convenient — dimmers matched to LED loads so nothing flickers, and every connection in a proper box.

Where work rises to the level that Florida code requires a licensed electrician and permit — new circuits, panel work — we bring in our licensed electrical partner under our project management, so you still get one point of contact and one fixed quote.

Fans · Recessed · Fixtures · Outlets

Electrical Installs Fort Myers Beach
& Naples.

Ceiling Fan Installation
Hung on fan-rated boxes — not the light-fixture boxes that wobble loose in a year. Balanced, controls programmed, and lanai-rated wet/damp models specified for outdoor living.
Recessed Lighting Installation
Layouts designed to the room — even spacing, correct wall wash, kitchens layered over work zones. Canless LED with clean ceiling cuts and dimmers matched to the load.
Lighting Installation
Pendants over islands at the right height, chandeliers on rated support, under-cabinet strips wired clean, and dimming zones that make one room feel like three.
Light Fixture Installation
Old unit down, box and wiring inspected, new fixture mounted level and centered, heavy pieces supported to structure. Bring your own fixtures or select through our design team.
Outlet Installation
Outlet and switch replacement, USB and smart upgrades, and GFCI protection where code requires it — worn or two-prong outlets are the quiet hazard in older SWFL homes.
Dimmers & Smart Switches
Dimmers matched to LED loads so nothing flickers at low levels, smart switches and scenes programmed before we leave, and three-way circuits sorted out correctly the first time.
Electrical Contractor Cutting Edge Bonita Springs (3)
Cutting Edge
Remodel by Cutting Edge
How It Works

Plan the Layout. Then Cut the Ceiling.

1 — Quote. Fixture list and photos get most jobs a same-day fixed quote; lighting layouts get an on-site plan.

2 — Layout. Cans, fans, and pendants marked on the actual room and confirmed with you before a single hole is cut.

3 — Install. Power off, rated boxes and supports in, fixtures mounted level, dimmers and controls matched to the load.

4 — Test & clean. Every switch, dimmer, and remote tested, ceiling dust cleaned up, old fixtures hauled away.

Pricing

What Drives Electrical
Installation Cost?

Electrical installs split into the fixtures you pick and the wiring work behind them — and access, circuit capacity, and count drive that second number more than the fixtures do.

Cost of the Fixtures
  • Light fixtures — flush mounts to statement chandeliers; the widest band
  • Recessed trims — standard LED to gimbal & color-select
  • Ceiling fans — big-box to designer, indoor & lanai-rated
  • Switches & dimmers — standard, dimmer & smart-home lines
  • Outlets — standard, GFCI, USB & weather-rated
Cost of Installation
  • Existing box vs. new location — swapping a fixture is quick; new locations mean fishing wire
  • Ceiling access — attic-accessible ceilings are economical; closed vaulted ceilings are not
  • Count — recessed lighting packages price far better per can than singles
  • Panel capacity — new circuits & load calcs for fans, EV chargers & appliances
  • Fan bracing — fan-rated boxes installed where builders skipped them
  • Permits — pulled & inspected where the work requires it

Clean placement, straight alignment & a tidy result under one fixed quote — across Bonita Springs, Bonita Beach, Estero & Ft Myers Beach.

Our Standard

Placed Clean. Wired Safe.

What We Install
  • Recessed & under-cabinet lighting
  • Chandeliers & pendants
  • Ceiling fans, indoor & lanai
  • Dimmers & smart switches
  • Outlets, GFCI & USB
Safety Standards
  • GFCI & AFCI protection where code requires
  • Load calculated before new circuits
  • Fan-rated boxes on every fan
  • Permits & inspections handled
  • Panel labeled when we close up
Popular Upgrades
  • Whole-room recessed packages
  • Kitchen under-cabinet LED
  • Lanai fans & lighting
  • Smart dimmers & scenes
  • EV charger circuits
Electrical Installation FAQ

Common Questions.

Does electrical work need a permit?
Fixture and switch swaps in existing boxes generally do not; new circuits, panel work, and EV charger installs do in Lee and Collier counties. We pull what the job requires and close out inspections — and we never advise skipping it, because unpermitted electrical surfaces at insurance time.
Can my panel handle an EV charger?
We run a load calculation before quoting — many SWFL homes have the spare capacity for a 40–50A circuit, some need a panel upgrade first. You get the honest answer and a fixed number for whichever path your panel requires.
How much does recessed lighting cost to add?
It depends on ceiling access and count — attic-accessible ceilings install economically, closed or vaulted ceilings take more labor per can, and packages of six or more price far better per light than one or two. Every layout is quoted fixed after we see the ceiling.
Can you install a ceiling fan where there is only a light fixture?
Yes — the existing box gets replaced with a fan-rated brace box first. Hanging a fan on a standard light box is the most common DIY mistake we get called to fix.
How many recessed lights does my room need?
A useful rule: one can per 20–25 square feet for general light, adjusted for ceiling height and layered with pendants or lamps. We lay it out on your room, not from a chart.
Do you handle work that needs a licensed electrician?
Yes — new circuits and panel work run through our licensed electrical partner under our project management and permit, so you keep one contact and one fixed quote.
Why do my LED lights flicker on the dimmer?
Old incandescent dimmers and modern LED loads do not mix. We install LED-compatible dimmers matched to your fixtures — the flicker disappears.
Can you install outdoor and lanai fans and lighting?
Yes — wet- and damp-rated fixtures specified for the location, which matters more here than anywhere. Indoor-rated fixtures on a lanai corrode in a season.
Why Cutting Edge

The Cutting Edge Standard
for Electrical.

Cutting Edge installs electrical the way inspectors wish everyone did — and the way designers wish everyone could. Nine consecutive years of Best of Houzz and 500+ projects across Bonita Springs, Bonita Beach, Estero, and Fort Myers Beach have taught us that great electrical work is measured twice: once in the panel, where load calcs, proper protection, and honest labeling live, and once in the room, where can lights land in a true grid, pendants center over the island, and every switch falls exactly where your hand expects it.

The Cutting Edge difference is the finished result, not just the connection. Recessed layouts are planned on the ceiling with you before a hole saw spins. Fans go on braced, fan-rated boxes even when that means adding the bracing the builder skipped. EV charger requests start with a real load calculation and end with an honest answer — spare capacity or panel upgrade — priced fixed either way. And every wall or ceiling we open for wire gets patched, textured, and painted by our own crews, so the only evidence of the work is the light itself.

Comparing electrical installation in Bonita Springs or Fort Myers Beach? Ask each bidder three things: who pulls the permit, whether the fan box is rated for the fan, and who repairs the drywall afterward. Then ask Cutting Edge. Those answers are why our lighting installs keep growing into kitchen remodels, and why homeowners from the golf communities to the beach towers keep one number for everything overhead.

Ready to light it right? Call (239) 469-6494 or book a walkthrough — layout planned in your rooms, quoted fixed, finished clean.

The Details That Finish
a Room.

Fans, cans, fixtures, and outlets — one fixed quote, clean placement, tidy finish. Proudly serving Bonita Springs, Bonita Beach, Ft Myers Beach & surrounding Southwest Florida.

📞 (239) 469-6494 Book Free Session →
10 AI Tools · Free After Consultation

Your Bonita / Fort Myers Beach
Remodel Tools.

AI room visualization, comp data, and Bonita market intelligence built specifically for Bonita Springs and Fort Myers Beach homeowners. These tools charge $14–$36/month elsewhere. You get them free after your consultation.

01
AI Room Visualizer
Upload a photo. See your kitchen or bath transformed in 30 seconds in any style, any material.
Photo → AI Render
02
Bonita Style Matchmaker
6 questions. A personalized design profile with AI renders at every price tier.
Style Profile
03
InvisaCook Visualizer
See any kitchen without a visible cooktop. Authorized exclusive dealer — the only tool of its kind.
Exclusive to South Florida
04
Cabinet Visualizer
Swap door styles, finishes, and paint colors from our actual showroom catalog onto your kitchen.
Product Visualization
05
Countertop Visualizer
See Cambria, Dekton, quartzite, and marble options applied directly to your kitchen photo.
Material Selection
06
Paint Color Visualizer
Repaint any room in seconds — every wall, any color, photo-real light and shadow.
Color Selection
07
Flooring Visualizer
Swap tile, LVP, and wood floors into your rooms — laid in the right direction, at the right scale.
Material Selection
08
Bathroom Visualizer
Tub-to-shower conversions and full bath restyles rendered on your actual bathroom photo.
Photo → AI Render
09
Outdoor Kitchen Visualizer
Turn your lanai photo into a full outdoor kitchen — grills, stone, bar seating, lighting.
Photo → AI Render
10
Bonus Room Converter
Empty spare room in — office, gym, media room, or guest suite out. Four futures, one photo.
Room Conversion
Access all 10 tools — free with your consultation.
90-day access · 50 renders · Watermarked for sharing · No subscription
Unlocked after your
free planning session
Book Free Session →